What does precision filter mean?
A precision filter is a tool that separates solid materials from liquids or gases. It works well for separating different kinds of mixtures.
There are a lot of tiny bits of dirt and bad stuff in compressed air. This can be a big problem for the machines that use it, especially in places where industry is happening. Most of the dust is very tiny, less than 2 micrometers. It could easily get into the pipes with the compressed air. When water, dirt, rust and germs get trapped in the air we use to do work, they can mix together and become a dangerous substance. This can damage the pipes and make it harder to do our jobs, which can cost us money.
When you don't put a filter on your equipment, it can cause problems.
When the air used to operate machines is not good enough, it can cause the machines to break and need to be replaced without warning.
This causes less water to flow and makes the pressure higher.
The air storage tank and pipes can get damaged and rusty over time.
When valves and pneumatics get blocked, it can harm the machines and slow down production. In worse cases, it can really damage the equipment.
Making the work area dirty and expensive to produce things.
The different ways that precision filters can be used.
If businesses need really clean compressed air, they can use high-tech filters to fix all the problems. These filters are important for industries like medicine, food, chemicals, environment, and water.
Sorting of exact filters
There are big and small filters, they are divided by their size. The big filters are about 300mm to 3000mm wide. They can also make custom filters for special jobs. Small filters are under 1000mm and big filters are over 1000mm.
The precision filter is built in a particular way.
"Shell" is a company that provides oil and gas products and services.
The shells for filters are created with steel and sometimes covered with rubber, stainless steel, glass steel, or plastic.
2, Materials used for filtering.
To make sure the filters work well, different types of filter materials are used. These materials include PP meltblown, line burned, folded, titanium cartridge, activated carbon cartridge, glass fiber cartridge and other tubular cartridges.
The auxiliary system is a system that provides support or backup to the main system.
There are pipes with openings, parts to stop and start the flow, and places to let out excess fluids.
Instructions for how to put in the filter.
Make sure the pressure you use is not more than what the filter can handle. Install the filter near where you will use it and where it's coolest, usually after the after-cooler and gas storage tank.
Don't put the filter after the fast opening valve. The filter should go up and down, not sideways, so you can easily change the part inside. If the filter is big, make sure it stays in place with support. The filter stops stuff going the wrong way and hitting things.
